57HS 1.8° 步进蜗轮蜗杆减速电机
NEMA 23 1.8° STEPPER MOTOR WITH WORM REDUCTION GEARBOX
电气性能参数 / ELECTRICAL SPECIFICATIONS
57HS 1.8° 步进蜗轮蜗杆减速电机常规指标及参数
电机机械尺寸与接线图控制信号定义
电机机械尺寸工程图
NMRV030 蜗轮蜗杆减速机技术参数
产品特点与定制/使用注意事项
6大产品核心优势、上位机调试支持与现场机械安装规范
驱控一体、体积小、易安装、省空间
Integrated drive and control design, compact size, easy to install and space-efficient.
多种控制方式支持
输入 IO、脉冲、PWM 占空比、CAN 总线、RS485 总线
Multiple control methods: IO input, pulse, PWM duty cycle, CAN bus and RS485 bus.
15位绝对值磁编 + FOC 矢量算法
实现高精度、高效、高性能闭环控制
All products adopt 15-bit single-turn absolute magnetic encoders combined with FOC algorithm.
CANopen 标准伺服通信协议
支持位置控制、速度控制、原点回零控制
Compliant with CANopen standard servo protocol, supporting position, speed and homing functions.
四重工业级硬件安全保护
具有过压、欠压、过温、过流等保护功能
Integrated protection against overvoltage, undervoltage, overheating and overcurrent.
简单易用的专属上位机调试软件
配套功能齐全,方便工程师快速上手及调试电机
Comes with user-friendly upper computer software for quick commissioning.
我们可根据客户要求定制电机的电气参数、电机输出轴尺寸等形状,也可以增配同步带轮、偏心减速箱、高精度行星减速箱、断电抱闸及特种编码器等。
We can customize the motor electrical parameters, output shaft size and other shapes according to customer requirements. We can also add planetary reducers, encoders, brakes, etc.
电机安装时务必使用安装止口(Φ38.1mm)定位,严格保证电机输出轴与负载的同心度;电机正常工作时表面温度不允许超过 85℃。
Notes: When installing the motor, position it via the mounting spigot. Ensure strict concentricity between the motor output shaft and the load. The surface temperature shall not exceed 85°C during normal operation.